S-SeriesForum.com  

Go Back   S-SeriesForum.com > Technical Corner > Chassis Electrical

Reply
 
Thread Tools Display Modes
Old 03-11-2018, 01:51 PM   #1
IntheBatCave
SSF Subscriber*
Needs a new avatar
 
IntheBatCave's Avatar
 
Join Date: Aug 2001
Location: Nashua NH
Posts: 7,412
Power door wiring diagrams?

Does anyone have access to 98+ power door wiring diagrams? I have a Haynes manual with "typical" wiring diagrams in it for the door locks, windows, mirrors and speakers. But the wiring harness I pulled out of the donor doors seem to have more conductors than I'd expect, specifically for the locks. There are three separate plugs, 6 conductors, going to the door latch for the locks, and all the wiring diagrams, which look the same, only show two conductors. Are the extra wires position switches to lock/unlock the other doors, when you use a key in the door?

This probably sounds like a stupid question, but the lock button on the drivers door is a door lock switch correct, and not a window lock to disable the other power windows?
__________________
*Rob*
98 S10 4.3 auto 3" exhaust Vortech SC
IntheBatCave is offline   Reply With Quote
Old 03-11-2018, 04:03 PM   #2
mkgearhead
Super Moderator
Torque moves me.
 
mkgearhead's Avatar
 
Join Date: Aug 2001
Location: Weare N.H.
Posts: 10,526
I just sent you a few diagrams. I can get connector end views if you need. I "dislike" the way GM designed these, way over-complicated.
__________________
-Mitch K

'91 Z70 Bravada lowered 4" 350 Vortec w/TBI, TCI-700r4, KYB's, 9C1 cop car steering gear, rear sway bar, yada yada...
'05 Subaru Legacy wagon (wife's daily)
'04 Subaru Forester XT EJ255 turbo, TBE, lowered 1.5" w/springs
'02 K2500HD single cab 6.0 4L80E 8' plow sander/spreader
Case 580K 4x4 w/chains, 10' power angle plow

To help support this site with a donation click here
My cardomain site
Quote:
"The spirit of resistance to government
is so valuable on certain occasions,
that I wish it to be always kept alive.
It will often be exercised when wrong,
but better so than not to be exercised at all.
I like a little rebellion now and then." -Thomas Jefferson (1743-1826)
mkgearhead is offline   Reply With Quote
Old 03-11-2018, 04:31 PM   #3
IntheBatCave
SSF Subscriber*
Needs a new avatar
 
IntheBatCave's Avatar
 
Join Date: Aug 2001
Location: Nashua NH
Posts: 7,412
Quote:
Originally Posted by mkgearhead View Post
I just sent you a few diagrams. I can get connector end views if you need. I "dislike" the way GM designed these, way over-complicated.
Thanks I'm looking them over now. I really appreciate your help. If you can get the connector end views that would be awesome, anything to help me get a better understanding of what GM was doing would be great. Your right, they really over complicated things. I'm looking at harness and there are four separate orange wires, which in the wiring diagrams I've been looking at show them as at least two separate fused circuits. They could have at least made them different colors.
__________________
*Rob*
98 S10 4.3 auto 3" exhaust Vortech SC
IntheBatCave is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:18 AM.
 


Design by: vBulletin Skins Zone
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.